Automatic Light Sensor Harness (Work with the Light Bar Wiring)

SKU
77724336
Rating:
100% of 100
In stock
$9.97
-
+
US -- In Stock
CN -- In Stock

Located in US, you can choose to ship from either US warehouse or China warehouse; Located in other countries, only ship from China warehouse.

STOCK ALERT
Estimated Date of Arrival: 07.04,2019

An alert was set for you, you will receive an email if this item will get back in stock!
Estimated Date of Arrival: 07.04,2019

  • 30 DAYS MONEY BACK GUARANTEE

  • 2 YEARS WARRANTY

More Information
installation_location Interior

This automatic light sensor wiring harness needs to use together with the light bar harness (for one light or two). It cannot work alone.

Acc wiring length: 3 Meters
Connector lug wiring length: 0.9 Meters
Light sensor probe: 0.9 Meter
Wire Diameter: 4.2mm
Light sensor value: 300LX
Can be used to match wiring loom harness kit with fuse and relay.

Automobile automatic induction lamps receiver head should be installed between the front windscreen of the cockpit and center console connection, and make sure no any obstructions blocking the light.
Automatic induction lamps control button should be installed near the driver,where the driver can easily touch.

The ACC control line of the automatic sensing headlight shall be connected to the ACC safety sheet in the front engine compartment and the main safe box by the driving cabin,when the ACC is not connected, the automatic sensing function will not start.


Instruction for Use: 
1.The manual button of control box is for controlling on and off of the LED headlight manually. When you press the manual button, the red indicator light will be on and manual mode starts. At the same time, the green indicator light will be on and the LED headlight turns on.
2.When you press the manual button again, the green indicator light will be off as well as the LED headlight.
3.Under the manual mode, the red indicator light is always on.
4.The automatic button of control box is for controlling on and off of the LED headlight automatically. When you press the automatic button, the blue indicator light will be on and automatic mode starts.
5.Under the automatic mode, the light sensor will automatically turn on and turn off the LED headlight according to the surrounding environment. When it’s dark around, the LED headlight turns on automatically and green indicator light will be on. When it’s bright around, the LED headlight turns off and green indicator light will be off.
6.The automatic system will turn on the LED headlight in 0.1s when it’s dark around and will turn off the LED headlight within 10s.
7.Under the automatic mode, the blue indicator light is always on.
8.Only when connecting with ACC signal wire, the automatic induction system works.


Note: Please do not operate in the process of driving!

Package included:
1 set of car automatic light sensor wiring harness



Write Your Own Review
You're reviewing:Automatic Light Sensor Harness (Work with the Light Bar Wiring)
Your Rating