Recently, we find that many people ask about their light bar wiring kits. So we will discuss here and see if these problems we have received can solve your problems.
Q1: Do I need extra wiring kits to get my light bar installed?
A: First, we need to say that the wiring on the light bar is very short. You need to add extra wiring to connect it to the battery. Then you can choose to add 2 normal wirings to connect the light bar with the battery. That is OK if you purchase a small light bar in low wattage. The most important part of a wiring harness is the relay. The relay can allow a low current circuit to control the high- current circuit you light bar give out. In brief, the relay can help you keep the light bar working in a smooth circumstance and keep your light working in a longer time. For some people who purchased our 5D series in old models, we have sent a plug and play wirings. If you do not like it. You can cut it and use the normal wirings. There are also two wirings there—red wiring for positive pole and black wiring for negative pole. For some series with atmosphere functions, you’d better add a dual switch wiring to separately control the normal light and function light.
Q2: I used to buy the normal wirings but now I want to change the switch with the rocker switch. Can I do that?
A: Yes, you can do that. The connection is simple. You can unplug the switch of your old wirings and then use the rocker switch to connect the light bar and the battery. You can check the picture below.
Now, we receive these two questions frequently and want to share with you the solutions. If you have any other problems, please send us. Auxbeam will help you solve that.