Remove the screws and clips holding the front grille in place.
Remove the front grille so you can gain access to the headlights.
Remove the metal bracket ring.
Unplug the adapter and remove the stock headlights.
Replace back with the Jeep Wrangler LED headlights the same way they were removed and connect the adapter.
If your head beam does not work at all during the initial installation, please check both the adapter on the LED headlights and the LED driver module box.
Make sure no pins are pushed out.
If the problem persists, you may need to re-pin the adapter.
If the high beam takes a couple tries to turn on, it means that there is not enough power being supplied.
The battery may need to be replaced or you may have to add a relay harness to directly draw the power from the battery.
If you experience the issue where your high beam is periodically flickering, you will need an anti-flicker decoder to solve the problem once and for all.
Sometimes, the issue will be localized on one side only.
If that’s the case, you will need to switch the LED drivers module box from the driver side to passenger side and vice versa to see if the module box is the issue.
Once your Jeep Wrangler headlights work, put the ring and the screws back. Once everything is secure, reinstall the front grille.
Your Jeep Wrangler is now ready for some bold off-road action with these new LED headlights.
Hello, my name is Jessica. Thanks for visiting my blog. Here are many detailed descriptions and reviews about Auxbeam LED lights. Browse the blog if you are free, looking for some resources which is helpful to you.